The recommended operating voltage range for the SHT40A-AD1B-R2 is 1.8 V to 3.6 V.
The SHT40A-AD1B-R2 has a built-in POR circuit that resets the sensor when the power supply is turned on. The typical startup time is around 15 ms, during which the sensor performs a self-test and initializes its internal registers.
The maximum cable length for the I2C interface is around 30 cm (12 inches), but it's recommended to keep the cable length as short as possible to minimize signal degradation. Use a twisted pair cable with a maximum capacitance of 50 pF/m to ensure reliable communication.
The SHT40A-AD1B-R2 is calibrated during manufacturing, and the calibration data is stored in the sensor's internal EEPROM. No additional calibration is required, but the sensor's calibration data can be read and stored in the microcontroller for further processing if needed.
The SHT40A-AD1B-R2 has a typical response time of 1 second for temperature and 5 seconds for humidity. This means that the sensor takes around 1 second to settle to its final temperature reading and 5 seconds to settle to its final humidity reading after a change in the environment. This response time should be considered when designing your application, especially if you need fast measurements.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
SHT40A-AD1B-R2 Overview
Use the download button to access the SHT40A-AD1B-R2 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like SHT40,
or try a keyword search, such as Other Sensors/Transducers
