Description:• Any-Frequency 6/8/12-output programmable clock generators
• Offered in three different package sizes, supporting different
combinations of output clocks and user configurable hardware
input pins
• 32-pin, up to 6 outputs
• 40-pin, up to 8 outputs
• 48-pin, up to 12 outputs
• MultiSynth™ technology enables any-frequency synthesis on
any output up to 250 MHz
• Integer output frequencies up to 333.33 MHz
• Embedded 50 MHz crystal option (E/F/G/H/L grades)
• Highly configurable output path featurin
GRID ARRAY, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH
Peak Reflow Temperature (Cel):
260
Primary Clock/Crystal Frequency-Nom:
250 MHz
Seated Height-Max:
1.1 mm
Supply Current-Max:
70 mA
Supply Voltage-Max:
3.63 V
Supply Voltage-Min:
1.71 V
Supply Voltage-Nom:
1.8 V
Surface Mount:
YES
Technology:
CMOS
Terminal Finish:
Nickel/Gold (Ni/Au)
Terminal Form:
NO LEAD
Terminal Pitch:
0.5 mm
Terminal Position:
BOTTOM
Time@Peak Reflow Temperature-Max (s):
40
Width:
6 mm
uPs/uCs/Peripheral ICs Type:
CLOCK GENERATOR, PROCESSOR SPECIFIC
SI5332G-D-GM2 Frequently Asked Questions (FAQs)
The recommended PCB layout for the SI5332G-D-GM2 involves keeping the device as close as possible to the crystal oscillator, using a solid ground plane, and minimizing the length of the clock signal traces. Additionally, it is recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane to reduce noise and improve signal integrity.
The SI5332G-D-GM2 can be configured for a specific clock frequency output using the I2C interface. The device has a set of registers that can be programmed to set the desired clock frequency, output format, and other parameters. The specific configuration will depend on the application requirements and the desired clock frequency output.
The SI5332G-D-GM2 can generate clock frequencies up to 1.4 GHz, making it suitable for a wide range of applications, including high-speed data converters, networking equipment, and high-performance computing systems.
The SI5332G-D-GM2 has a built-in phase-locked loop (PLL) that helps to reduce clock jitter and phase noise. The device also has a low-noise voltage-controlled oscillator (VCO) that helps to minimize phase noise. Additionally, the device has a set of registers that can be programmed to optimize the PLL loop filter for specific application requirements.
Yes, the SI5332G-D-GM2 is compatible with industrial temperature ranges from -40°C to +85°C, making it suitable for use in a wide range of industrial and commercial applications.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
SI5332G-D-GM2 Overview
Use the download button to access the SI5332G-D-GM2 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like SI533,
or try a keyword search, such as Clock Generators
