SiT2025BE-S8-18E-125.000000 footprint, schematic symbol and 3D model by SiTime

Symbol

PCB Footprints

3D Models

SiT2025BE-S8-18E-125.000000 Details

SiTime recommends a symmetrical PCB layout with a solid ground plane, and to keep the oscillator away from high-frequency signals and noise sources. A 4-layer PCB with a dedicated ground plane is recommended.
The SIT2025BE-S8-18E-125.000000 requires a stable power supply with a voltage range of 1.8V to 3.3V. Ensure the power supply has a low noise floor and is decoupled with a 10nF to 100nF capacitor.
The output signal should be terminated with a 50Ω load to ensure proper signal integrity. A series resistor of 22Ω to 33Ω can be added to the output for additional signal conditioning.
The SIT2025BE-S8-18E-125.000000 has a typical start-up time of 5ms. Ensure your system design can accommodate this start-up time, and consider adding a power-on reset circuit to ensure proper system initialization.
The SIT2025BE-S8-18E-125.000000 has a typical temperature stability of ±50 ppm over the operating temperature range of -40°C to 85°C. It also has a typical voltage stability of ±50 ppm over the operating voltage range of 1.8V to 3.3V.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the SiT2025BE-S8-18E-125.000000 schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like SiT20, or try a keyword search, such as XO

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →