SiT8920AM-31-33N-16.000000 - SiTime

SiT8920AM-31-33N-16.000000 Frequently Asked Questions (FAQs)

• What is the recommended PCB layout for this oscillator?
  The recommended PCB layout for SIT8920AM-31-33N-16.000000 can be found in the SiTime Corporation's application note AN-100, which provides guidelines for proper PCB design and layout to ensure optimal performance and minimize noise.
• How do I calculate the loading capacitance for this oscillator?
  The loading capacitance for SIT8920AM-31-33N-16.000000 can be calculated using the formula: CL = (C1 x C2) / (C1 + C2), where C1 and C2 are the capacitors connected between the output pin and VDD or GND. The recommended value for CL is 10pF to 20pF.
• What is the ESR requirement for the external capacitors?
  The ESR (Equivalent Series Resistance) requirement for the external capacitors is typically less than 5ohms. This ensures that the oscillator can operate within the recommended frequency range and maintains its stability.
• How do I ensure the oscillator is operated within its recommended operating temperature range?
  The SIT8920AM-31-33N-16.000000 oscillator is rated for operation between -40°C to +85°C. Ensure that the operating temperature of the oscillator does not exceed this range to prevent degradation or failure. Proper thermal management and heat sinking may be necessary in high-temperature environments.
• What is the recommended soldering temperature profile for this oscillator?
  The recommended soldering temperature profile for SIT8920AM-31-33N-16.000000 is a peak reflow temperature of 260°C, with a maximum time above 240°C of 10 seconds. This ensures that the oscillator is not damaged during the soldering process.