SIT9501AI-02A2-YY10-156.250000 footprint, schematic symbol and 3D model by SiTime

Symbol

PCB Footprints

3D Models

SIT9501AI-02A2-YY10-156.250000 Details

Manufacturer Part Number:
SIT9501AI-02A2-YY10-156.250000
Rohs Code:
Yes
Part Life Cycle Code:
Active
Package Description:
PQFD-6
Country Of Origin:
Malaysia, Taiwan, Thailand
Manufacturer:
SiTime Corporation
YTEOL:
6
Additional Feature:
ENABLE/DISABLE FUNCTION; COMPLEMENTARY OUTPUT; DIFFERENTIAL OUTPUT
Frequency Adjustment-Mechanical:
NO
Frequency Stability:
25%
JESD-609 Code:
e3
Mounting Feature:
SURFACE MOUNT
Number of Terminals:
6
Operating Frequency-Nom:
156.25 MHz
Operating Temperature-Max:
85 °C
Operating Temperature-Min:
-40 °C
Oscillator Type:
LVDS
Output Load:
100 OHM
Package Equivalence Code:
SOLCC6,.08,35
Physical Dimension:
2.5mm x 2mm x 0.9mm
Screening Level:
MIL-STD-883F
Supply Voltage-Max:
3.63 V
Supply Voltage-Min:
1.71 V
Surface Mount:
YES
Symmetry-Max:
55/45 %
Terminal Finish:
Tin (Sn)

SiTime recommends a symmetrical PCB layout with a solid ground plane, and the oscillator should be placed close to the clock input pin of the device being driven. A 4-layer PCB with a dedicated ground plane is recommended for high-frequency designs.
The SIT9501AI-02A2-YY10-156.250000 has an internal 15kΩ pull-up resistor. To ensure proper termination, a 15pF to 30pF capacitor should be connected between the output pin and ground. This helps to maintain signal integrity and reduce electromagnetic interference (EMI).
The SIT9501AI-02A2-YY10-156.250000 is rated for operation from -40°C to +85°C. However, it's essential to note that the oscillator's frequency stability and jitter performance may degrade at extreme temperatures.
Yes, the SIT9501AI-02A2-YY10-156.250000 has a low power consumption of 3.5mA (typical) at 1.8V supply voltage, making it suitable for battery-powered or low-power designs.
The SIT9501AI-02A2-YY10-156.250000 has a typical startup time of 5ms. To ensure stable operation, it's recommended to provide a clean power supply with minimal noise and ripple. Additionally, a power-on reset (POR) circuit can be used to ensure the oscillator is properly initialized during power-up.

Community Provided

System Verified

Community Approved

Use the download button to access the SIT9501AI-02A2-YY10-156.250000 schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like SIT95, or try a keyword search, such as XO

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →