Coilcraft provides a recommended PCB land pattern in their application notes, which can be found on their website. The recommended land pattern is a rectangular pad with dimensions of 2.5 mm x 1.5 mm, with a 1.1 mm diameter hole in the center for the inductor's lead.
The SLC1049-121MLC has a maximum operating temperature of 125°C. To ensure reliable operation, it's essential to consider thermal management in the design. This can be achieved by providing adequate airflow, using thermal vias, and keeping the inductor away from heat sources. Coilcraft also provides thermal derating curves in their datasheet to help with design decisions.
The SRF of the SLC1049-121MLC is not explicitly stated in the datasheet. However, according to Coilcraft's application notes, the SRF can be estimated using the following formula: SRF (MHz) = 1000 / (π * √(L * C)), where L is the inductance and C is the equivalent series capacitance. For the SLC1049-121MLC, the estimated SRF is around 250 MHz.
While the SLC1049-121MLC is designed for general-purpose use, it's not optimized for high-frequency applications. Coilcraft recommends using their high-frequency inductor series, such as the SLC5045 or SLC7055, for applications above 100 MHz. However, if you still want to use the SLC1049-121MLC, ensure that you carefully evaluate its performance at the desired frequency using simulation tools or prototyping.
To ensure reliability, follow proper storage and handling procedures, avoid exceeding the maximum ratings, and use a suitable soldering process. Coilcraft also recommends using a conformal coating to protect the inductor from environmental factors. Additionally, consider implementing fault detection and protection mechanisms in your design to prevent overcurrent, overvoltage, and overheating conditions.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
SLC1049-121MLC Overview
Use the download button to access the SLC1049-121MLC schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like SLC10,
or try a keyword search, such as Fixed Inductors
About COILCRAFT
Colicraft designs and manufactures high performing magnectic components, RF chip inductors, power magnectics, and filters. Coilcraft has engineering, manufacturing, and distribution facilities in North America, Asia, and Europe.
