The recommended PCB land pattern for the SLC1175-271MEC is a rectangular pad with a size of 4.5 mm x 2.5 mm, with a 1.5 mm diameter hole in the center for the inductor's lead.
The SLC1175-271MEC has a maximum operating temperature of 125°C. Ensure good airflow around the inductor, and consider using a heat sink or thermal interface material if the inductor will be operating near its maximum temperature rating.
The SRF of the SLC1175-271MEC is not explicitly stated in the datasheet, but it can be estimated using the inductor's inductance and capacitance values. A rough estimate can be made using the formula SRF ≈ 1 / (2 * π * sqrt(L * C)), where L is the inductance and C is the capacitance.
The SLC1175-271MEC is designed for use in DC-DC converters and other power supply applications, but it can be used in high-frequency applications up to several hundred kHz. However, the inductor's performance may degrade at very high frequencies due to skin effect and proximity effect losses.
Use a soldering iron with a temperature of 250-260°C, and apply a small amount of solder paste to the PCB pads. Place the inductor on the PCB, ensuring it is centered and even. Apply gentle pressure to the inductor while soldering to ensure good contact.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
SLC1175-271MEC Overview
Use the download button to access the SLC1175-271MEC 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like SLC11,
or try a keyword search, such as Fixed Inductors
About COILCRAFT
Colicraft designs and manufactures high performing magnectic components, RF chip inductors, power magnectics, and filters. Coilcraft has engineering, manufacturing, and distribution facilities in North America, Asia, and Europe.
