The recommended PCB land pattern can be found in the TDK Corporation's datasheet or in the IPC-7351 standard. It's essential to follow the recommended land pattern to ensure proper soldering and to prevent thermal and mechanical stress.
During reflow soldering, it's crucial to follow the recommended temperature profile to prevent damage to the inductor. The maximum temperature rating is 260°C, and the component should be kept away from direct heat sources. It's also recommended to use a soldering iron with a temperature-controlled tip.
The ESR of the SLF12565T-152MR37-H inductor is not explicitly stated in the datasheet. However, according to TDK Corporation's application notes, the ESR can be estimated using the inductor's DC resistance (Rdc) and the operating frequency. For this specific inductor, the Rdc is 152 mΩ, and the ESR can be estimated to be around 200-300 mΩ at 100 kHz.
The SLF12565T-152MR37-H inductor is designed to withstand moderate vibration levels. However, it's essential to evaluate the inductor's performance in the specific vibration environment. TDK Corporation recommends following the IEC 60068-2-6 standard for vibration testing. If the vibration levels exceed the recommended specifications, it's recommended to consider alternative inductors or to consult with TDK Corporation's application engineers.
The SLF12565T-152MR37-H inductor meets various safety certifications, including UL, EN, and IEC standards. To ensure compliance, it's essential to follow the recommended PCB layout, component placement, and soldering guidelines. Additionally, the inductor should be used within its specified operating conditions, and the system should be designed to meet the required safety standards.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
SLF12565T-152MR37-H Overview
Use the download button to access the SLF12565T-152MR37-H schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like SLF12,
or try a keyword search, such as Fixed Inductors
About TDK
TDK-Lambda is a global supplier of power supplies and related products. It is a subsidiary of TDK Corporation, a leading electronics company based in Japan. TDK-Lambda specializes in designing and manufacturing a wide range of AC-DC power supplies, DC-DC converters, programmable power supplies, and EMC/EMI filters for various industries and applications.
