The recommended land pattern for the SMBJ110A-M3/52 can be found in the Vishay Intertechnologies' application note AN10343, which provides guidelines for surface mount assembly of SMB packages.
To prevent damage during soldering, it is recommended to follow the soldering profile recommended by Vishay Intertechnologies, which is typically a peak temperature of 260°C for 10-30 seconds. Additionally, the device should be handled by the body, not the leads, to prevent mechanical stress.
The maximum allowable voltage derating for the SMBJ110A-M3/52 is typically 10% to 15% below the rated voltage, depending on the specific application and environmental conditions. However, it is recommended to consult with Vishay Intertechnologies' application engineers for specific guidance.
The SMBJ110A-M3/52 is a general-purpose TVS diode, and its performance may degrade at high frequencies. For high-frequency applications, it is recommended to consider specialized TVS diodes designed for high-frequency operation, such as the SMBJ series with a 'HF' suffix.
After soldering, the SMBJ110A-M3/52 should be cleaned with a mild solvent, such as isopropyl alcohol, to remove any flux residue. The device should then be dried with a soft brush or air blower to prevent moisture accumulation.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
SMBJ110A-M3/52 Overview
Use the download button to access the SMBJ110A-M3/52 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like SMBJ1,
or try a keyword search, such as Transient Suppressors
