The recommended land pattern for the SMDJ13A is a rectangular pad with a minimum size of 2.5mm x 1.5mm, with a 0.5mm radius corner. The pad should be centered on the component and have a solder mask defined gap of 0.2mm.
To ensure reliable soldering of the SMDJ13A, use a soldering iron with a temperature of 250°C to 260°C, and apply a small amount of solder paste to the pads. Use a reflow oven with a peak temperature of 240°C to 250°C, and a dwell time of 30-60 seconds.
The maximum operating temperature of the SMDJ13A is 150°C, with a derating of 1.33% per °C above 125°C.
Yes, the SMDJ13A is suitable for high-reliability applications, such as aerospace, automotive, and industrial control systems, due to its high surge current capability and low clamping voltage.
Select the correct SMDJ13A variant by considering the maximum voltage, current, and power requirements of your application. Refer to the datasheet for the specific characteristics of each variant, such as the standoff voltage, clamping voltage, and peak pulse current.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
SMDJ13A Overview
Use the download button to access the SMDJ13A schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like SMDJ1,
or try a keyword search, such as Transient Suppressors