The maximum clock frequency of the SN74AHC273N is 100 MHz, but it can vary depending on the operating conditions and the load capacitance. It's recommended to check the timing characteristics in the datasheet and perform simulations to ensure the device meets the specific application requirements.
To ensure proper power and decoupling, connect the VCC pin to a stable 5V power supply, and decouple the power pins with 0.1uF ceramic capacitors as close to the device as possible. Additionally, use a 10uF bulk capacitor on the power supply line to filter out noise and ripple.
The SN74AHC273N can sink or source up to 8mA per output pin, but the total current should not exceed 50mA for the entire device. It's essential to check the output current requirements of the connected devices and ensure that the SN74AHC273N can handle the load.
The asynchronous clear (CLR) input is active-low, meaning it should be connected to GND to clear the flip-flops. When CLR is low, the outputs will be reset to zero, regardless of the clock (CLK) input. Ensure that CLR is properly debounced and synchronized with the clock signal to avoid unintended clearing of the flip-flops.
To minimize signal integrity issues and ensure reliable operation, follow these layout and routing guidelines: keep the clock signal trace short and away from noisy signals, use a solid ground plane, and route the output signals away from the input signals. Additionally, use a consistent impedance and termination scheme for the signal traces.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
SN74AHC273N Overview
Use the download button to access the SN74AHC273N schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like SN74A,
or try a keyword search, such as FF/Latches
About Texas Instruments
Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.
Suggested Parts
If you searched for SN74AHC273N, you might also be interested in these parts:
