The maximum clock frequency for the SN74ALS164ANSR is typically around 30 MHz, but it can vary depending on the specific application and operating conditions. It's recommended to check the device's timing characteristics and perform thorough testing to ensure reliable operation at the desired clock frequency.
To ensure proper initialization and clearing of the shift register, it's recommended to use the asynchronous clear (CLR) input to reset the device. Additionally, the serial input (SER) should be held low during power-up to prevent unwanted data from being shifted in. It's also a good practice to use a pull-down resistor on the SER input to ensure it remains low during power-up.
The maximum voltage that can be applied to the output pins of the SN74ALS164ANSR is the same as the supply voltage (VCC), which is typically 5V. However, it's recommended to ensure that the output voltage does not exceed the maximum rating specified in the datasheet to prevent damage to the device.
While the SN74ALS164ANSR is typically designed for 5V systems, it can be used in 3.3V systems with some limitations. The device's input and output voltage levels will need to be adjusted accordingly, and the maximum clock frequency may be reduced. It's recommended to consult the datasheet and perform thorough testing to ensure reliable operation in a 3.3V system.
To handle clock skew and signal integrity issues, it's recommended to use proper PCB design techniques, such as using a clock tree architecture, adding termination resistors, and using a low-skew clock distribution network. Additionally, it's important to ensure that the clock signal is clean and has a fast rise and fall time to prevent clock skew and signal integrity issues.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
SN74ALS164ANSR Overview
Use the download button to access the SN74ALS164ANSR schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like SN74A,
or try a keyword search, such as Shift Registers
About Texas Instruments
Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.
