The maximum clock frequency of the SN74ALS165N is 100 MHz, but it can vary depending on the operating conditions and the quality of the clock signal.
To ensure proper power and decoupling, use a high-quality power supply with a low impedance output, and decouple the VCC pin with a 0.1 μF ceramic capacitor to ground. Additionally, use a 10 μF electrolytic capacitor in parallel to filter out any noise or ripple.
The recommended termination scheme for the SN74ALS165N is to use a series terminator (e.g., 33 Ω) at the far end of the transmission line, and a parallel terminator (e.g., 50 Ω) at the receiver end. This helps to reduce reflections and ensure signal integrity.
Yes, the SN74ALS165N can be used in a 3.3V system, but it is recommended to use a voltage regulator to ensure a stable 3.3V supply. Additionally, the input and output voltage levels may need to be adjusted to ensure compatibility with the 3.3V system.
The asynchronous reset input (CLR) should be tied to a pull-up resistor (e.g., 1 kΩ) to ensure that it is not left floating. When the CLR input is asserted, the device will reset and all outputs will be cleared. It is recommended to use a debounced signal to ensure a clean reset.
Trust Checks
This model has been verified by system checks.
System Verified
Sponsored
SN74ALS165N Overview
Use the download button to access the SN74ALS165N schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like SN74A,
or try a keyword search, such as Shift Registers
About Texas Instruments
Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.
