The maximum cable length supported by the SP232EET-L is approximately 100 meters (328 feet) at a data rate of 250 kbps. However, this can vary depending on the cable quality, noise environment, and other factors.
The SP232EET-L is a half-duplex transceiver by default. To configure it for full-duplex operation, you need to connect the RTS (Request to Send) and CTS (Clear to Send) signals externally. This allows the transmitter and receiver to operate independently, enabling full-duplex communication.
The power consumption of the SP232EET-L varies depending on the operating mode and data rate. In typical operating conditions, the device consumes around 10-15 mA at 3.3V supply voltage. However, this can increase to around 30-40 mA during high-speed data transmission.
The SP232EET-L is designed to operate at 3.3V supply voltage. While it can tolerate 5V input signals, it's not recommended to use it in 5V systems without proper voltage regulation and level shifting. This is because the device's internal logic operates at 3.3V, and excessive voltage can cause damage or malfunction.
The SP232EET-L has built-in ESD protection up to ±15 kV on the RS-232 pins. However, it's still recommended to add external ESD protection devices, such as TVS diodes or ESD arrays, to ensure robust protection against electrostatic discharge events.
Trust Checks
This model has been verified by system checks.
System Verified
Sponsored
SP232EET-L Overview
Use the download button to access the SP232EET-L schematic symbol and PCB footprint.
To find more CAD model downloads similar to this part, try a partial part number search, like SP232,
or try a keyword search, such as Line Driver or Receivers
