The recommended operating voltage range for the SP8K32FRATB is 1.65V to 3.6V.
The SP8K32FRATB has a built-in POR and BOR circuit. The POR is triggered when the power supply voltage rises above 1.65V, and the BOR is triggered when the power supply voltage falls below 1.65V. You can use external resistors and capacitors to adjust the POR and BOR thresholds.
The maximum clock frequency supported by the SP8K32FRATB is 32MHz.
The SP8K32FRATB has a 12-bit ADC with up to 16 channels. You can configure the ADC using the ADC control registers and trigger the conversion using the ADC start conversion command. The ADC result is stored in the ADC data register.
Yes, the SP8K32FRATB has several low-power modes, including sleep mode, stop mode, and deep power-down mode. You can configure the low-power modes using the power management control registers.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
SP8K32FRATB Overview
Use the download button to access the SP8K32FRATB schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like SP8K3,
or try a keyword search, such as Power Field-Effect Transistors
