ROHM recommends a PCB layout with a thermal pad connected to a large copper area on the bottom layer, and multiple vias to dissipate heat efficiently. A minimum of 2oz copper thickness is recommended.
To ensure reliable operation in high-temperature environments, it's essential to follow ROHM's recommended thermal design guidelines, use a suitable heat sink, and consider derating the device's power consumption according to the ambient temperature.
Although the datasheet doesn't specify a maximum allowed voltage, ROHM recommends limiting the input voltage to 5.5V to prevent damage to the internal ESD protection diodes.
Yes, the SP8K32HZGTB can be used in a 3.3V system, but the output voltage will be limited to 3.3V. ROHM recommends using an external voltage regulator or level shifter if a higher output voltage is required.
The POR and BOD features are enabled by default. To disable them, connect the POR/BOD pin to VCC through a 10kΩ resistor. For custom POR/BOD settings, consult ROHM's application notes and programming guides.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
SP8K32HZGTB Overview
Use the download button to access the SP8K32HZGTB schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like SP8K3,
or try a keyword search, such as Power Field-Effect Transistors
