A symmetrical layout with a central ground plane and minimal track lengths is recommended. Keep the input and output tracks separate and avoid crossing them over the inductor.
Ensure good airflow around the component, avoid overheating nearby components, and consider using a heat sink if the ambient temperature exceeds 70°C.
The maximum allowed voltage stress is 1.5 times the rated voltage (220V) for a maximum of 100ms. Exceeding this may damage the component.
While the SRN1060-220M is designed for 50/60Hz applications, it can be used up to 400Hz with reduced performance. However, it's not recommended for high-frequency applications above 1kHz.
Use a soft-start circuit or an NTC thermistor to limit the inrush current. You can also consider adding a pre-charge circuit to reduce the inrush current.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
SRN1060-220M Overview
Use the download button to access the SRN1060-220M 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like SRN10,
or try a keyword search, such as Fixed Inductors
