Bourns recommends a symmetrical PCB layout with a solid ground plane, and keeping the component away from high-frequency noise sources. A minimum of 2 oz copper thickness is recommended for the PCB.
Bourns recommends using a soldering iron with a temperature of 250°C to 260°C, and a solder with a melting point of 180°C to 190°C. The component should be soldered within 3 seconds to 5 seconds, and the solder joints should be inspected for quality.
The SRP1265A-6R0M is rated for operation from -40°C to 125°C, but derating is required above 85°C. Consult the datasheet for specific derating curves.
Yes, the SRP1265A-6R0M is designed to withstand vibrations up to 10 G peak acceleration, but it's recommended to follow Bourns' guidelines for vibration testing and to consult with a Bourns application engineer for specific requirements.
Bourns recommends following standard ESD handling procedures, including the use of ESD-safe workstations, wrist straps, and packaging materials. The component should be handled by the edges or the body, avoiding direct contact with the pins.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
SRP1265A-6R0M Overview
Use the download button to access the SRP1265A-6R0M schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like SRP12,
or try a keyword search, such as Fixed Inductors
