Bourns recommends a symmetrical PCB layout with the device centered on the board, and keeping the input and output traces as short as possible to minimize parasitic inductance and capacitance. Additionally, a solid ground plane and proper decoupling capacitors are essential for optimal performance.
Bourns recommends using a soldering iron with a temperature of 250°C to 260°C, and applying a small amount of solder paste to the pads. The device should be mounted on a flat, clean PCB surface, and the leads should be bent at a 90-degree angle to ensure proper seating.
The SSA-2-100A is rated for operation from -40°C to +125°C, but derating is required for temperatures above 85°C. Consult the datasheet for specific derating curves and guidelines.
Yes, the SSA-2-100A is designed to meet the requirements of high-reliability and aerospace applications. However, it's essential to consult with Bourns' application engineers to ensure the device meets the specific requirements of your application, and to obtain any necessary certifications or documentation.
Start by verifying the input voltage, output load, and PCB layout meet the recommended specifications. Check for signs of physical damage, such as cracks or corrosion, and ensure the device is properly soldered and mounted. If issues persist, consult Bourns' application notes and technical support resources for further guidance.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
SSA-2-100A Overview
Use the download button to access the SSA-2-100A 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like SSA-2,
or try a keyword search, such as Other Sensors/Transducers
