Part Image

SST38LF6401-90-RT/3YB-E - Microchip

Description: Parallel Rad Tolerant Flash Memory

Download SST38LF6401-90-RT/3YB-E Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
3D Models
SST38LF6401-90-RT/3YB-E - Microchip  - 3D model
click to zoom
Note! To download footprints and symbols, use the build and request forms below

Build

Launch Build Wizard
Build Wizard not available for this package category!

Request (48 hours)

SST38LF6401-90-RT/3YB-E Details

  • Manufacturer Part Number:

    SST38LF6401-90-RT/3YB-E

  • Part Life Cycle Code:

    Active

  • Pin Count:

    48

  • Manufacturer Package Code:

    MFPF-48

  • Country Of Origin:

    Thailand

  • ECCN Code:

    3A001.a.2.c

  • HTS Code:

    8542.32.00.51

  • Factory Lead Time:

    8 Weeks

  • Manufacturer:

    Microchip Technology Inc

  • YTEOL:

    20

  • Access Time-Max:

    90 ns

  • Boot Block:

    BOTTOM

  • Command User Interface:

    YES

  • Common Flash Interface:

    YES

  • Data Polling:

    YES

  • Data Retention Time-Min:

    20

  • Endurance:

    10000 Write/Erase Cycles

  • JESD-30 Code:

    R-CDFP-F48

  • JESD-609 Code:

    e4

  • Length:

    19 mm

  • Memory Density:

    67108864 bit

  • Memory IC Type:

    FLASH

  • Memory Width:

    16

  • Number of Functions:

    1

  • Number of Ports:

    1

  • Number of Sectors/Size:

    32K

  • Number of Terminals:

    48

  • Number of Words:

    4194304 words

  • Number of Words Code:

    4000000

  • Operating Mode:

    ASYNCHRONOUS

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -55 °C

  • Organization:

    4MX16

  • Output Characteristics:

    3-STATE

  • Package Body Material:

    CERAMIC, METAL-SEALED COFIRED

  • Package Code:

    HDFP

  • Package Equivalence Code:

    FL48,.75,20

  • Package Shape:

    RECTANGULAR

  • Package Style:

    FLATPACK, HEAT SINK/SLUG

  • Page Size:

    4 words

  • Parallel/Serial:

    PARALLEL

  • Programming Voltage:

    3.3 V

  • Ready/Busy:

    YES

  • Seated Height-Max:

    3.02 mm

  • Sector Size:

    128

  • Standby Current-Max:

    0.00006 A

  • Supply Current-Max:

    0.05 mA

  • Supply Voltage-Max (Vsup):

    3.6 V

  • Supply Voltage-Min (Vsup):

    3 V

  • Supply Voltage-Nom (Vsup):

    3.3 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    MILITARY

  • Terminal Finish:

    Nickel/Gold (Ni/Au)

  • Terminal Form:

    FLAT

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    DUAL

  • Toggle Bit:

    YES

  • Total Dose:

    50k Rad(Si) V

  • Type:

    NOR TYPE

  • Width:

    13.44 mm

SST38LF6401-90-RT/3YB-E Frequently Asked Questions (FAQs)

  • The recommended operating voltage range for the SST38LF6401 is 2.7V to 3.6V, as specified in the datasheet. However, it's essential to note that the device can tolerate a voltage range of 2.3V to 3.9V for a short duration, but prolonged operation outside the recommended range may affect its performance and reliability.
  • During power-up, the HOLD# pin should be kept high until the power supply has reached a stable voltage level. During power-down, the HOLD# pin should be kept low to ensure that the device enters a low-power state. It's essential to follow the recommended power-up and power-down sequences to prevent data corruption and ensure reliable operation.
  • The SST38LF6401 supports a maximum clock frequency of 104 MHz. However, the actual clock frequency may be limited by the system design and the quality of the clock signal. It's essential to ensure that the clock signal meets the recommended specifications to prevent data corruption and ensure reliable operation.
  • To implement a reliable write protection mechanism, you can use the WP# pin to control write access to the device. When the WP# pin is low, the device is in a write-protected state, and any write attempts will be ignored. You can also use the Status Register (SR) to monitor the write protection status and implement additional protection mechanisms in your system design.
  • The recommended method for erasing the SST38LF6401 is to use the Chip Erase (CE) command. This command erases the entire device, including the boot block and the configuration bits. It's essential to follow the recommended erase procedure to prevent data corruption and ensure reliable operation.

Trust Checks

No trust score is available for this model.
Trust Score Unavailable
Sponsored

SST38LF6401-90-RT/3YB-E Overview

Use the download button to access the SST38LF6401-90-RT/3YB-E 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like SST38, or try a keyword search, such as Flash Memories

About Microchip

Microchip Technology Inc. is a leading manufacturer of microcontrollers and semiconductor devices for a wide range of applications in the aerospace, automotive, consumer electronics, industrial, and medical industries. Alongside a comprehensive product portfolio, Microchip Technology Inc. also provides easy-to-use development tools that enable engineers to create optimal designs quickly with minimal iterations to reduce risk while lowering total system costs to market. Headquartered in Chandler, Arizona, th

Parts related to SST38LF6401-90-RT/3YB-E

Showing 0 results

Select Package Category

Package Categories

Datasheet PDF Preview

SST38LF6401-90-RT/3YB-E Alternates

Showing results

Image Part Number Model
Part Image SST38LF6401-90-RT/3YB-SV Microchip Technology Inc

SST38LF6401 Rad Tolerant Memory - QML-V Type Ceramic - SV