Sensirion provides a recommended PCB layout in their application note AN17, which includes guidelines for component placement, thermal vias, and routing to minimize thermal gradients and ensure accurate temperature measurements.
The STS40-BD1B-R3 is factory-calibrated, and no additional calibration is required. However, if you need to perform a calibration, Sensirion provides a calibration protocol in their application note AN19, which involves measuring the sensor's output at multiple temperature points and calculating the correction factors.
The maximum cable length for the I2C interface depends on the specific application and the capacitance of the cable. As a general guideline, Sensirion recommends keeping the cable length below 30 cm (12 inches) to ensure reliable communication. For longer cable lengths, consider using I2C bus extenders or repeaters.
The STS40-BD1B-R3 is designed to operate in a wide range of temperatures, but it is not intended for use in humid or wet environments. If you need to use the sensor in a humid environment, consider using a protective coating or enclosure to prevent moisture ingress.
The typical power consumption of the STS40-BD1B-R3 is around 1.5 μA in sleep mode and 150 μA in active mode. The exact power consumption depends on the measurement frequency, voltage supply, and other factors, so be sure to check the datasheet for more information.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
STS40-BD1B-R3 Overview
Use the download button to access the STS40-BD1B-R3 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like STS40,
or try a keyword search, such as Temperature Sensors
