The recommended PCB layout involves placing the component on a 4-layer board with a solid ground plane, and using thermal vias to dissipate heat. A heat sink or thermal pad can also be used to improve thermal management.
The SWPA8040S5R6NT has built-in overvoltage protection (OVP) and overcurrent protection (OCP) features. OVP is set to 6.5V, and OCP is set to 4A. However, it's recommended to add external protection circuits for added reliability.
While the datasheet specifies an operating temperature range of -40°C to 125°C, it's recommended to operate the component within -20°C to 100°C for optimal reliability and performance.
The SWPA8040S5R6NT has a soft-start feature that limits inrush current during power-on. During power-off, the component has a built-in discharge circuit to quickly discharge the output capacitor.
A low-ESR ceramic capacitor with a value of 10uF to 22uF is recommended for input decoupling. The capacitor should be placed as close to the component as possible to minimize noise and ripple.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
SWPA8040S5R6NT Overview
Use the download button to access the SWPA8040S5R6NT schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like SWPA8,
or try a keyword search, such as Fixed Inductors
