Description:Zener Voltage Range - 3.3 V to 200 V; ESD Rating of Class 3 (>16 KV) per Human Body Model; Flat Handling Surface for Accurate Placement; Package Design for Top Side or Bottom Circuit Board Mounting Mechanical Characteristics:; CASE: Void-free, transfer-molded plastic; FINISH: All external surfaces are corrosion resistant with readily solderable leads; MAXIMUM CASE TEMPERATURE FOR SOLDERING PURPOSES: 260°C for 10 seconds; LEADS: Modified L-Bend providing more contact area to bond pads; POLARITY: Cathode indi
A recommended PCB layout for the SZ1SMB5942BT3G would be to use a ground plane, keep the leads as short as possible, and use a common cathode configuration to minimize parasitic inductance and capacitance. Additionally, it's recommended to use a 1-2 mm wide trace for the anode and cathode connections.
To ensure proper biasing, the SZ1SMB5942BT3G requires a stable voltage supply, and the recommended operating conditions should be followed. The anode voltage should be between 2.5V and 5.5V, and the cathode voltage should be 0V. Additionally, a 1kΩ to 10kΩ resistor can be used in series with the anode to limit the current and prevent overvoltage.
The maximum surge current rating for the SZ1SMB5942BT3G is 40A for a 10/1000 μs waveform, as per the IEC 61000-4-5 standard. However, it's recommended to derate the surge current based on the application's specific requirements and environmental conditions.
The SZ1SMB5942BT3G is rated for operation up to 150°C, but it's recommended to derate the device's performance and consider the application's specific requirements when operating at high temperatures. Additionally, the device's reliability and lifespan may be affected by prolonged exposure to high temperatures.
To ensure proper soldering and mounting, follow the recommended soldering profile and use a solder with a melting point above 217°C. The device should be mounted on a PCB with a copper thickness of at least 1 oz, and the leads should be soldered using a soldering iron with a temperature of 350°C to 400°C.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
SZ1SMB5942BT3G Overview
Use the download button to access the SZ1SMB5942BT3G schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like SZ1SM,
or try a keyword search, such as Zener Diodes
