SiTime recommends a 4-layer PCB with a dedicated ground plane, and to keep the oscillator away from high-frequency signals and noise sources. A good layout practice is to use a symmetrical layout, with the oscillator in the center, and to minimize the distance between the oscillator and the crystal.
The SIT9121AC-2B3-33E27.000000 has a CMOS output, and it's recommended to terminate it with a 10kΩ to 20kΩ resistor to VCC or GND, depending on the application. This helps to reduce electromagnetic interference (EMI) and ensures proper signal integrity.
The SIT9121AC-2B3-33E27.000000 is rated for operation from -40°C to +85°C, but it's recommended to derate the frequency stability and jitter performance at extreme temperatures. Consult the datasheet for specific derating curves.
Yes, the SIT9121AC-2B3-33E27.000000 is designed to withstand vibrations up to 20G, but it's recommended to follow proper mounting and soldering techniques to ensure the oscillator is securely attached to the PCB. Additionally, consider using a vibration-dampening material or a shock-absorbing mount to further reduce the impact of vibrations.
First, verify that the oscillator is properly powered and terminated. Check the PCB layout for any noise sources or signal integrity issues. Use a spectrum analyzer or a frequency counter to measure the oscillator's frequency and jitter. If issues persist, consult the datasheet or contact SiTime's technical support for further assistance.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
SiT9121AC-2B3-33E27.000000 Overview
Use the download button to access the SiT9121AC-2B3-33E27.000000 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like SiT91,
or try a keyword search, such as XO
