The recommended operating voltage range for the TC7SET00F is 2.7V to 5.5V.
The TC7SET00F has a polarity marker on the package, which indicates the direction of the output voltage. Make sure to connect the output pin to the correct rail (VCC or GND) to avoid damage to the device.
The maximum output current that the TC7SET00F can handle is 50mA. Exceeding this limit may cause the device to overheat or malfunction.
The TC7SET00F has a built-in power-up sequence control. When the input voltage rises, the output voltage will follow the input voltage with a delay of approximately 10ms. This ensures that the output voltage is stable before the device becomes active.
The enable pin (EN) is used to control the output voltage of the TC7SET00F. When the EN pin is high, the output voltage is enabled. When the EN pin is low, the output voltage is disabled and the device enters a low-power standby mode.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
TC7SET00F,LJ(CT Overview
Use the download button to access the TC7SET00F,LJ(CT schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like TC7SE,
or try a keyword search, such as Gates