The recommended PCB layout for the TDA21590 is a 4-layer board with a solid ground plane on the bottom layer, and a split power plane on the top layer. This helps to reduce electromagnetic interference (EMI) and ensures good thermal performance.
To optimize thermal performance, ensure good thermal conductivity between the device and the heat sink, use a thermal interface material (TIM) with a thermal conductivity of at least 1 W/mK, and design the PCB to allow for good airflow around the device.
The maximum allowed voltage on the VCC pin is 18V, but it's recommended to operate the device at a voltage between 12V and 15V for optimal performance and reliability.
To troubleshoot issues with the TDA21590, start by checking the power supply voltage, ensuring that it's within the recommended range. Then, verify that the input signals are correct and that the device is properly configured. Use an oscilloscope to check the output signals and look for any signs of oscillation or instability.
The TDA21590 is rated for operation up to 150°C, but it's recommended to operate the device at a temperature below 125°C to ensure optimal performance and reliability. Above 125°C, the device's performance may degrade, and its lifespan may be reduced.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
TDA21590 Overview
Use the download button to access the TDA21590 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like TDA21,
or try a keyword search, such as Switching Regulator or Controllers
