OVER LOAD, OVER VOLTAGE, OVER TEMPERATURE, SHORT CIRCUIT
Ripple Voltage (Main Out):
0.08484 Vrms
Screening Level:
IEC/EN/UL 62368-1
Seated Height-Max:
38.5 mm
Surface Mount:
NO
Technology:
HYBRID
Terminal Form:
UNSPECIFIED
Terminal Position:
UNSPECIFIED
Total Power Output-Max:
20 W
Trim/Adjustable Output:
NO
Warm-up Time:
0.7 s
Width:
47 mm
TE20A2403B01 Frequently Asked Questions (FAQs)
SL Power Electronics recommends a multi-layer PCB with a solid ground plane and a thermal pad connected to a heat sink or a metal chassis for efficient heat dissipation. A minimum of 2oz copper thickness is recommended for the PCB.
To ensure EMC, SL Power Electronics recommends using a metal enclosure, keeping the power supply away from sensitive components, and using EMI filters or shielding on the input and output lines.
The derating curve for the TE20A2403B01 is typically 2.5% per degree Celsius above 40°C. This means that for every degree above 40°C, the output power should be reduced by 2.5% to ensure reliable operation.
Yes, the TE20A2403B01 can be used in a redundant or parallel configuration, but it requires additional circuitry and design considerations to ensure proper operation and fault tolerance. SL Power Electronics recommends consulting with their application engineers for guidance.
The MTBF for the TE20A2403B01 is typically around 500,000 hours, calculated according to the Telcordia SR-332 standard. However, this value may vary depending on the specific application and operating conditions.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
TE20A2403B01 Overview
Use the download button to access the TE20A2403B01 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like TE20A,
or try a keyword search, such as Power Supply Modules
