Please enter a minimum 3 letters or numbers
Technical Content
Part Image

THS3001ID - Texas Instruments

Description: THS3001ID, Operational Amplifier Current Feedback, 1750MHz 12 to 28V, 8-Pin SOIC

Download THS3001ID Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
THS3001ID - Texas Instruments - PCB symbol
click to zoom
PCB Footprints
THS3001ID - Texas Instruments PCB footprint - Small Outline Packages - Small Outline Packages - D0008A
click to zoom
3D Models
THS3001ID - Texas Instruments - 3D model - Small Outline Packages - D0008A
click to zoom

THS3001ID Details

  • Manufacturer Part Number:

    THS3001ID

  • Brand Name:

    Texas Instruments

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Obsolete

  • Part Package Code:

    SOIC

  • Package Description:

    SOIC-8

  • Pin Count:

    8

  • Country Of Origin:

    Taiwan

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    Texas Instruments

  • YTEOL:

    0

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    CURRENT-FEEDBACK

  • Average Bias Current-Max (IIB):

    15 µA

  • Bandwidth (3dB)-Nom:

    350 MHz

  • Bias Current-Max (IIB) @25C:

    10 µA

  • Common-mode Reject Ratio-Min:

    65 dB

  • Common-mode Reject Ratio-Nom:

    73 dB

  • Frequency Compensation:

    YES

  • Input Offset Voltage-Max:

    3000 µV

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e4

  • Length:

    4.9 mm

  • Low-Bias:

    NO

  • Low-Offset:

    NO

  • Micropower:

    NO

  • Moisture Sensitivity Level:

    1

  • Neg Supply Voltage Limit-Max:

    -16.5 V

  • Neg Supply Voltage-Nom (Vsup):

    -5 V

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Packing Method:

    TUBE

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    NO

  • Programmable Power:

    NO

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.75 mm

  • Slew Rate-Nom:

    6500 V/us

  • Supply Current-Max:

    9 mA

  • Supply Voltage Limit-Max:

    16.5 V

  • Supply Voltage-Nom (Vsup):

    5 V

  • Surface Mount:

    YES

  • Technology:

    BIPOLAR

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    NICKEL PALLADIUM GOLD

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Unity Gain BW-Nom:

    420000

  • Wideband:

    YES

  • Width:

    3.9 mm

THS3001ID Frequently Asked Questions (FAQs)

  • A good PCB layout for the THS3001ID involves keeping the input and output traces short and away from each other, using a solid ground plane, and placing decoupling capacitors close to the device. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane.
  • The gain resistor values for the THS3001ID depend on the desired gain and bandwidth of the amplifier. A good starting point is to use the recommended values in the datasheet, and then adjust them based on the specific requirements of your application. It's also important to consider the trade-off between gain and bandwidth.
  • The maximum power dissipation of the THS3001ID is 1.4W. To ensure you don't exceed it, you need to calculate the power dissipation based on the supply voltage, output current, and package thermal resistance. You can use the thermal calculation tool on the Texas Instruments website to help with this calculation.
  • The THS3001ID has a built-in low-pass filter, but you may need to add additional filtering to remove high-frequency noise. You can use a passive RC filter or an active filter using an op-amp. The choice of filter depends on the specific requirements of your application and the frequency range of the noise you're trying to remove.
  • The recommended input impedance for the THS3001ID is 50 ohms, and the recommended output impedance is 50 ohms or lower. This ensures maximum power transfer and minimal signal reflection.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

THS3001ID Overview

Use the download button to access the THS3001ID schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like THS30, or try a keyword search, such as Operational Amplifiers

About Texas Instruments

Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.

Parts related to THS3001ID

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

THS3001ID Alternates

Showing results

Image Part Number Model
Part Image THS3001CDR Texas Instruments

Operational Amplifier, 1 Func, 3000uV Offset-Max, 350MHz Band Width, BIPolar, PDSO8
Part Image THS3001CDG4 Texas Instruments

Operational Amplifier, 1 Func, 3000uV Offset-Max, 350MHz Band Width, BIPolar, PDSO8
Part Image THS3001CDRG4 Texas Instruments

Operational Amplifier, 1 Func, 4000uV Offset-Max, 350MHz Band Width, BIPolar, PDSO8
Part Image THS3001IDG4 Texas Instruments

Operational Amplifier, 1 Func, 3000uV Offset-Max, 350MHz Band Width, BIPolar, PDSO8