Part Image

THS4031ID - Texas Instruments

Description: Texas Instruments THS4031ID Op Amp, 120MHz, 10 → 28 V, 8-Pin SOIC

Download THS4031ID Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
THS4031ID - Texas Instruments PCB footprint - Small Outline Packages - Small Outline Packages - 8-Pin SOIC-
click to zoom
3D Models
THS4031ID - Texas Instruments  - 3D model - Small Outline Packages - 8-Pin SOIC-
click to zoom

THS4031ID Details

  • Manufacturer Part Number:

    THS4031ID

  • Brand Name:

    Texas Instruments

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Obsolete

  • Part Package Code:

    SOIC

  • Pin Count:

    8

  • Country Of Origin:

    Taiwan

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    Texas Instruments

  • YTEOL:

    0

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Average Bias Current-Max (IIB):

    8 µA

  • Bandwidth (3dB)-Nom:

    90 MHz

  • Bias Current-Max (IIB) @25C:

    20 µA

  • Common-mode Reject Ratio-Min:

    85 dB

  • Common-mode Reject Ratio-Nom:

    95 dB

  • Frequency Compensation:

    YES

  • Input Offset Current-Max (IIO):

    0.25 µA

  • Input Offset Voltage-Max:

    2000 µV

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e4

  • Length:

    4.9 mm

  • Low-Bias:

    NO

  • Low-Offset:

    NO

  • Micropower:

    NO

  • Moisture Sensitivity Level:

    1

  • Neg Supply Voltage Limit-Max:

    -16.5 V

  • Neg Supply Voltage-Nom (Vsup):

    -15 V

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP8,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Packing Method:

    TUBE

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    NO

  • Programmable Power:

    NO

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.75 mm

  • Slew Rate-Min:

    80 V/us

  • Slew Rate-Nom:

    100 V/us

  • Supply Current-Max:

    10 mA

  • Supply Voltage Limit-Max:

    16.5 V

  • Supply Voltage-Nom (Vsup):

    15 V

  • Surface Mount:

    YES

  • Technology:

    BIPOLAR

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Nickel/Palladium/Gold (Ni/Pd/Au)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Unity Gain BW-Nom:

    1200000

  • Voltage Gain-Min:

    28000

  • Wideband:

    YES

  • Width:

    3.9 mm

THS4031ID Frequently Asked Questions (FAQs)

  • To minimize noise and ensure optimal performance, it is recommended to place the THS4031ID close to the signal source, use a ground plane, and keep the input and output traces short and symmetrical. Additionally, decoupling capacitors should be placed close to the power pins.
  • The gain resistors should be chosen based on the desired gain and bandwidth requirements. A good starting point is to use the gain resistor calculator tool provided by Texas Instruments or to consult the application notes for the THS4031ID.
  • The maximum power dissipation for the THS4031ID is dependent on the package type and the ambient temperature. The power dissipation can be calculated using the formula: Pd = (Vcc x Icc) + (Vee x Iee), where Vcc and Vee are the supply voltages and Icc and Iee are the supply currents.
  • To ensure stability and prevent oscillations, it is recommended to use a compensation capacitor between the output and the inverting input, and to ensure that the gain and phase margins are sufficient. Additionally, the layout and placement of the components should be optimized to minimize parasitic capacitance and inductance.
  • The recommended input impedance for the THS4031ID is typically in the range of 1 kΩ to 10 kΩ, while the recommended output impedance is typically in the range of 100 Ω to 1 kΩ. However, the optimal impedance values may vary depending on the specific application and requirements.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

THS4031ID Overview

Use the download button to access the THS4031ID schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like THS40, or try a keyword search, such as Operational Amplifiers

About Texas Instruments

Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.

Parts related to THS4031ID

Showing 0 results

THS4031ID Alternates

Showing results

Image Part Number Model
Part Image THS4031IDR Texas Instruments

Operational Amplifier, 1 Func, 2000uV Offset-Max, 90MHz Band Width, BIPolar, PDSO8

Part Image THS4031IDRG4 Texas Instruments

Operational Amplifier, 1 Func, 2000uV Offset-Max, BIPolar, PDSO8