Part Image

TL064CDRG4 - Texas Instruments

Description: Operational Amplifiers - Op Amps Quad Lo-Pwr JFET-Inp Gen-Purp Op Amp

Download TL064CDRG4 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
TL064CDRG4 - Texas Instruments PCB footprint - Small Outline Packages - Small Outline Packages - D (-R-PDSO-G14)
click to zoom
3D Models
TL064CDRG4 - Texas Instruments  - 3D model - Small Outline Packages - D (-R-PDSO-G14)
click to zoom

TL064CDRG4 Details

  • Manufacturer Part Number:

    TL064CDRG4

  • Brand Name:

    Texas Instruments

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Obsolete

  • Part Package Code:

    SOIC

  • Package Description:

    SOIC-14

  • Pin Count:

    14

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    Texas Instruments

  • YTEOL:

    0

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Average Bias Current-Max (IIB):

    0.01 µA

  • Bias Current-Max (IIB) @25C:

    0.0004 µA

  • Common-mode Reject Ratio-Min:

    70 dB

  • Common-mode Reject Ratio-Nom:

    86 dB

  • Frequency Compensation:

    YES

  • Input Offset Voltage-Max:

    20000 µV

  • JESD-30 Code:

    R-PDSO-G14

  • JESD-609 Code:

    e4

  • Length:

    8.65 mm

  • Low-Bias:

    YES

  • Low-Offset:

    NO

  • Micropower:

    YES

  • Moisture Sensitivity Level:

    1

  • Neg Supply Voltage Limit-Max:

    -18 V

  • Neg Supply Voltage-Nom (Vsup):

    -15 V

  • Number of Functions:

    4

  • Number of Terminals:

    14

  • Operating Temperature-Max:

    70 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP14,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Packing Method:

    TR

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    NO

  • Programmable Power:

    NO

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.75 mm

  • Slew Rate-Min:

    1.5 V/us

  • Slew Rate-Nom:

    3.5 V/us

  • Supply Current-Max:

    1 mA

  • Supply Voltage Limit-Max:

    18 V

  • Supply Voltage-Nom (Vsup):

    15 V

  • Surface Mount:

    YES

  • Technology:

    BIPOLAR

  • Temperature Grade:

    COMMERCIAL

  • Terminal Finish:

    NICKEL PALLADIUM GOLD

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Unity Gain BW-Nom:

    1000

  • Voltage Gain-Min:

    3000

  • Wideband:

    NO

  • Width:

    3.9 mm

TL064CDRG4 Frequently Asked Questions (FAQs)

  • The maximum power dissipation of the TL064CDRG4 is dependent on the package type and thermal resistance. For the DIP package, the maximum power dissipation is approximately 840mW at 25°C. For the QFN package, it is approximately 1.4W at 25°C.
  • While the TL064CDRG4 is an op-amp, it can be used as a comparator in a pinch. However, it's not recommended as it's not optimized for comparator applications. The TL064CDRG4 has a relatively slow slew rate and may not provide the desired performance in comparator circuits. TI recommends using a dedicated comparator like the TLV7031 for comparator applications.
  • The input impedance of the TL064CDRG4 is typically around 2MΩ, but it can vary depending on the specific application and operating conditions. It's recommended to consult the datasheet and application notes for more information on input impedance and how it affects circuit performance.
  • The TL064CDRG4 is rated for operation up to 125°C, but its performance may degrade at higher temperatures. It's recommended to consult the datasheet and application notes for more information on temperature-related performance and limitations.
  • For optimal performance with the TL064CDRG4, it's recommended to follow good PCB layout practices, such as keeping the input and output traces short and separate, using a solid ground plane, and minimizing noise and interference. TI provides application notes and layout guidelines for the TL064CDRG4 and other op-amps.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

TL064CDRG4 Overview

Use the download button to access the TL064CDRG4 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like TL064, or try a keyword search, such as Operational Amplifiers

About Texas Instruments

Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.

Parts related to TL064CDRG4

Showing 0 results

TL064CDRG4 Alternates

Showing results

Image Part Number Model
Part Image TL064CDR Texas Instruments

Operational Amplifier, 4 Func, 15000uV Offset-Max, BIPolar, PDSO14

Part Image TL064CDT STMicroelectronics

Operational Amplifier, 14 Func, 20000uV Offset-Max, BIPolar, PDSO4

Part Image TL064CD Texas Instruments

Operational Amplifier, 4 Func, 15000uV Offset-Max, BIPolar, PDSO14

Part Image TL064CDR Rochester Electronics LLC

QUAD OP-AMP, 20000uV OFFSET-MAX, 1MHz BAND WIDTH, PDSO14, GREEN, PLASTIC, MS-012AB, SOIC-14