The maximum power dissipation of the TL071HIDR is dependent on the package type and ambient temperature. For the SOIC package, the maximum power dissipation is 670mW at 25°C. For the PDIP package, it is 840mW at 25°C. However, it's recommended to derate the power dissipation based on the ambient temperature to ensure reliable operation.
While the TL071HIDR is an op-amp, it can be used as a comparator in a pinch. However, it's not recommended as it's not optimized for comparator applications. The TL071HIDR has a relatively slow slew rate and may not provide the desired speed and accuracy for comparator applications. It's better to use a dedicated comparator like the LM339 or TLV7031 for such applications.
The input impedance of the TL071HIDR is typically around 2MΩ, but it can vary depending on the frequency and operating conditions. It's recommended to use an input resistor to match the impedance of the signal source and to reduce noise pickup.
Yes, the TL071HIDR can be used in a single-supply configuration, but it requires careful consideration of the input common-mode range and output voltage swing. The input common-mode range is typically from VCC- to VCC-1.5V, and the output voltage swing is typically from VCC-1.5V to VCC-0.5V. It's recommended to use a voltage divider or a virtual ground circuit to ensure proper operation.
The TL071HIDR has a relatively low noise floor, with a typical input voltage noise density of 18nV/√Hz and a typical input current noise density of 0.01pA/√Hz. However, the noise performance can be affected by the operating conditions, layout, and component selection. It's recommended to use proper noise reduction techniques, such as filtering and shielding, to minimize noise pickup.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
TL071HIDR Overview
Use the download button to access the TL071HIDR schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like TL071,
or try a keyword search, such as Operational Amplifiers
About Texas Instruments
Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.
