Part Image

TL082ACDE4 - Texas Instruments

Description: Operational Amplifiers - Op Amps JFET-Input Oper Amplifier

Download TL082ACDE4 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
TL082ACDE4 - Texas Instruments PCB footprint - Small Outline Packages - Small Outline Packages - D0008A
click to zoom
3D Models
TL082ACDE4 - Texas Instruments  - 3D model - Small Outline Packages - D0008A
click to zoom

TL082ACDE4 Details

  • Manufacturer Part Number:

    TL082ACDE4

  • Brand Name:

    Texas Instruments

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Obsolete

  • Part Package Code:

    SOIC

  • Package Description:

    GREEN, PLASTIC, MS-012AA, SOIC-8

  • Pin Count:

    8

  • Country Of Origin:

    Malaysia, Mexico

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    Texas Instruments

  • YTEOL:

    0

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Average Bias Current-Max (IIB):

    0.007 µA

  • Bias Current-Max (IIB) @25C:

    0.0002 µA

  • Common-mode Reject Ratio-Min:

    75 dB

  • Common-mode Reject Ratio-Nom:

    86 dB

  • Frequency Compensation:

    YES

  • Input Offset Current-Max (IIO):

    0.002 µA

  • Input Offset Voltage-Max:

    7500 µV

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e4

  • Length:

    4.9 mm

  • Low-Bias:

    YES

  • Low-Offset:

    NO

  • Micropower:

    NO

  • Moisture Sensitivity Level:

    1

  • Neg Supply Voltage Limit-Max:

    -18 V

  • Neg Supply Voltage-Nom (Vsup):

    -15 V

  • Number of Functions:

    2

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    70 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP8,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Packing Method:

    TUBE

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    NO

  • Programmable Power:

    NO

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.75 mm

  • Slew Rate-Min:

    8 V/us

  • Slew Rate-Nom:

    13 V/us

  • Subcategory:

    Operational Amplifier

  • Supply Current-Max:

    5.6 mA

  • Supply Voltage Limit-Max:

    18 V

  • Supply Voltage-Nom (Vsup):

    15 V

  • Surface Mount:

    YES

  • Technology:

    BIPOLAR

  • Temperature Grade:

    COMMERCIAL

  • Terminal Finish:

    Nickel/Palladium/Gold (Ni/Pd/Au)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    NOT SPECIFIED

  • Unity Gain BW-Nom:

    3000

  • Voltage Gain-Min:

    25000

  • Wideband:

    NO

  • Width:

    3.9 mm

TL082ACDE4 Frequently Asked Questions (FAQs)

  • The maximum power dissipation of the TL082ACDE4 is dependent on the ambient temperature and the package type. For the DIP package, the maximum power dissipation is 670mW at 25°C. However, this value can be derated to 5.5mW/°C for temperatures above 25°C.
  • While the TL082ACDE4 can be used as a comparator, it's not the best choice. The TL082ACDE4 is an op-amp designed for linear applications, and its output stage is not optimized for high-speed switching. Texas Instruments recommends using a dedicated comparator like the LM339 or LM2901 for comparator applications.
  • The input impedance of the TL082ACDE4 is typically around 2MΩ, but this can vary depending on the specific application and operating conditions. It's recommended to use an input resistor to match the impedance of the signal source and to reduce noise pickup.
  • Yes, the TL082ACDE4 can be used in a single-supply configuration, but the input common-mode range is limited to within 3V of the positive supply rail. Additionally, the output voltage swing will be reduced, and the op-amp may not be able to swing all the way to the positive supply rail.
  • The slew rate of the TL082ACDE4 is 13V/μs, which is relatively slow compared to modern op-amps. This can limit the op-amp's ability to handle high-frequency signals or fast transitions.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

TL082ACDE4 Overview

Use the download button to access the TL082ACDE4 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like TL082, or try a keyword search, such as Operational Amplifiers

About Texas Instruments

Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.

Parts related to TL082ACDE4

Showing 0 results

TL082ACDE4 Alternates

Showing results

Image Part Number Model
Part Image TL082ACDR Texas Instruments

Operational Amplifier, 2 Func, 6000uV Offset-Max, BIPolar, PDSO8

Part Image TL082ACDR Rochester Electronics LLC

DUAL OP-AMP, 7500uV OFFSET-MAX, 3MHz BAND WIDTH, PDSO8, GREEN, PLASTIC, MS-012AA, SOIC-8

Part Image TL072ACDR Rochester Electronics LLC

DUAL OP-AMP, 7500uV OFFSET-MAX, 3MHz BAND WIDTH, PDSO8, GREEN, PLASTIC, MS-012AA, SOIC-8

Part Image TL082ACDG4 Texas Instruments

Operational Amplifier, 2 Func, 7500uV Offset-Max, BIPolar, PDSO8