Please enter a minimum 3 letters or numbers
Technical Content
Part Image

TL5001AQDRG4Q1 - Texas Instruments

Description: Automotive Catalog Pulse-Width-Modulation Control Circuits

Download TL5001AQDRG4Q1 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
TL5001AQDRG4Q1 - Texas Instruments - PCB symbol
click to zoom
PCB Footprints
TL5001AQDRG4Q1 - Texas Instruments PCB footprint - Small Outline Packages - Small Outline Packages - D0008A
click to zoom
3D Models
TL5001AQDRG4Q1 - Texas Instruments - 3D model - Small Outline Packages - D0008A
click to zoom

TL5001AQDRG4Q1 Details

  • Manufacturer Part Number:

    TL5001AQDRG4Q1

  • Brand Name:

    Texas Instruments

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    SOIC

  • Pin Count:

    8

  • Country Of Origin:

    Mexico

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.90

  • Manufacturer:

    Texas Instruments

  • YTEOL:

    15

  • Analog IC - Other Type:

    SWITCHING CONTROLLER

  • Control Mode:

    VOLTAGE-MODE

  • Control Technique:

    PULSE WIDTH MODULATION

  • Input Voltage-Max:

    40 V

  • Input Voltage-Min:

    3.6 V

  • Input Voltage-Nom:

    6 V

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e4

  • Length:

    4.9 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Outputs:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Output Current-Max:

    3 A

  • Output Voltage-Max:

    50 V

  • Output Voltage-Min:

    1 V

  • Output Voltage-Nom:

    1 V

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Screening Level:

    AEC-Q100

  • Seated Height-Max:

    1.75 mm

  • Supply Current-Max (Isup):

    2.1 mA

  • Surface Mount:

    YES

  • Switcher Configuration:

    BUCK-BOOST

  • Switching Frequency-Max:

    400 kHz

  • Technology:

    BICMOS

  • Temperature Grade:

    AUTOMOTIVE

  • Terminal Finish:

    Nickel/Palladium/Gold (Ni/Pd/Au)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    3.9 mm

TL5001AQDRG4Q1 Frequently Asked Questions (FAQs)

  • A good PCB layout for the TL5001AQDRG4Q1 involves keeping the input and output traces separate, using a solid ground plane, and placing decoupling capacitors close to the device. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane.
  • The TL5001AQDRG4Q1 requires a single 3.3V or 5V power supply. It's recommended to use a low-dropout linear regulator or a switching regulator with a low noise output to power the device. Power sequencing is not critical, but it's recommended to power up the device after the input voltage has stabilized.
  • The TL5001AQDRG4Q1 can drive a maximum capacitive load of 1000 pF. Exceeding this limit may cause instability or oscillations in the output.
  • To filter out noise and ripple in the output of the TL5001AQDRG4Q1, you can use a low-pass filter consisting of a series resistor and a capacitor. The values of the resistor and capacitor depend on the frequency range of the noise and the desired cutoff frequency.
  • The TL5001AQDRG4Q1 has a thermal derating of 13.9 mW/°C. This means that the device's power dissipation decreases by 13.9 mW for every degree Celsius increase in junction temperature. This can affect the device's performance, especially at high temperatures, and may require additional thermal management.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

TL5001AQDRG4Q1 Overview

Use the download button to access the TL5001AQDRG4Q1 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like TL500, or try a keyword search, such as Switching Regulator or Controllers

About Texas Instruments

Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.

Parts related to TL5001AQDRG4Q1

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

TL5001AQDRG4Q1 Alternates

Showing results

Image Part Number Model
Part Image TL5001AQD Texas Instruments

Switching Controller, Voltage-mode, 3A, 400kHz Switching Freq-Max, PDSO8
Part Image TL5001AQDRG4 Texas Instruments

Switching Controller, Voltage-mode, 3A, 400kHz Switching Freq-Max, PDSO8
Part Image TL5001AQDG4 Texas Instruments

Switching Controller, Voltage-mode, 3A, 400kHz Switching Freq-Max, PDSO8