Please enter a minimum 3 letters or numbers
Technical Content
Part Image

TL5002CDR - Texas Instruments

Description: Voltage Tracking Termination Regulator

Download TL5002CDR Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
TL5002CDR - Texas Instruments - PCB symbol
click to zoom
PCB Footprints
TL5002CDR - Texas Instruments PCB footprint - Small Outline Packages - Small Outline Packages - D(R-PDSO-G)
click to zoom
3D Models
TL5002CDR - Texas Instruments - 3D model - Small Outline Packages - D(R-PDSO-G)
click to zoom

TL5002CDR Details

  • Manufacturer Part Number:

    TL5002CDR

  • Brand Name:

    Texas Instruments

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    SOIC

  • Pin Count:

    8

  • Country Of Origin:

    Mexico

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.90

  • Manufacturer:

    Texas Instruments

  • YTEOL:

    15

  • Analog IC - Other Type:

    SWITCHING CONTROLLER

  • Control Mode:

    VOLTAGE-MODE

  • Control Technique:

    PULSE WIDTH MODULATION

  • Input Voltage-Max:

    40 V

  • Input Voltage-Min:

    3.6 V

  • Input Voltage-Nom:

    6 V

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e4

  • Length:

    4.9 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Outputs:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -20 °C

  • Output Current-Max:

    3 A

  • Output Voltage-Max:

    50 V

  • Output Voltage-Min:

    1 V

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP8,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.75 mm

  • Surface Mount:

    YES

  • Switcher Configuration:

    SINGLE

  • Switching Frequency-Max:

    400 kHz

  • Technology:

    BIPOLAR

  • Temperature Grade:

    OTHER

  • Terminal Finish:

    Nickel/Palladium/Gold (Ni/Pd/Au)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    3.9 mm

TL5002CDR Frequently Asked Questions (FAQs)

  • The TL5002CDR is a high-frequency device and requires careful layout and placement to ensure proper operation. TI recommends placing the device close to the power supply, using short traces, and avoiding vias and corners. A solid ground plane and decoupling capacitors are also essential.
  • The output capacitor selection depends on the output voltage, output current, and desired ripple voltage. TI recommends using a low-ESR capacitor with a value between 10uF to 100uF. A higher capacitance value can reduce the output ripple voltage but may increase the startup time.
  • The TL5002CDR has an absolute maximum input voltage rating of 18V. However, the recommended operating input voltage range is 4.5V to 15V. Exceeding the maximum input voltage can damage the device.
  • The TL5002CDR does not have built-in OVP. To implement OVP, you can use an external voltage monitor IC or a zener diode with a resistor divider network to detect overvoltage conditions and shut down the device.
  • The thermal derating curve for the TL5002CDR is not explicitly provided in the datasheet. However, TI recommends following the general thermal derating guidelines for power management devices, which typically start derating at 125°C and reduce the output current by 50% at 150°C.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

TL5002CDR Overview

Use the download button to access the TL5002CDR schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like TL500, or try a keyword search, such as Switching Regulator or Controllers

About Texas Instruments

Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.

Parts related to TL5002CDR

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

TL5002CDR Alternates

Showing results

Image Part Number Model
Part Image TL5002CD Texas Instruments

Switching Controller, Voltage-mode, 3A, 400kHz Switching Freq-Max, BIPolar, PDSO8
Part Image TL5002CDRG4 Texas Instruments

Switching Controller, Voltage-mode, 0.1A, 500kHz Switching Freq-Max, BIPolar, PDSO8
Part Image TL5002CDG4 Texas Instruments

Switching Controller, Voltage-mode, 0.1A, 500kHz Switching Freq-Max, BIPolar, PDSO8