TLP180 footprint, schematic symbol and 3D model by Toshiba

Symbol

PCB Footprints

TLP180 Details

The maximum allowable voltage that can be applied to the input pins is 5V. Exceeding this voltage may damage the device.
To ensure reliable operation in high-temperature environments, it is recommended to derate the device's current and voltage ratings according to the temperature derating curve provided in the datasheet.
To minimize EMI, it is recommended to keep the PCB traces as short as possible, use a ground plane, and maintain a minimum spacing of 1.5 mm between the TLP180 and other components.
Yes, the TLP180 is suitable for high-speed data transmission applications up to 10 Mbps. However, the device's bandwidth and rise time should be considered when designing the system.
The resistor values should be chosen based on the specific application requirements, such as the input signal amplitude and the desired output current. A general guideline is to use a 1 kΩ to 10 kΩ resistor for the input stage and a 100 Ω to 1 kΩ resistor for the output stage.

Expert Contribution

System Verified

Community Approved

Use the download button to access the TLP180 schematic symbol and PCB footprint.

To find more CAD model downloads similar to this part, try a partial part number search, like TLP18, or try a keyword search, such as Optocoupler

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →