Toshiba recommends a PCB layout with a solid ground plane, short traces, and a minimum number of vias to reduce EMI. Additionally, the input and output pins should be separated as much as possible to minimize coupling.
To ensure reliability in high-temperature applications, it is recommended to derate the current and voltage ratings of the TLP188(E) according to the temperature derating curve provided in the datasheet. Additionally, the device should be mounted on a heat sink to dissipate heat effectively.
The maximum allowable voltage across the output pins of the TLP188(E) when it is in the off-state is 250 V. Exceeding this voltage may cause damage to the device.
Yes, the TLP188(E) can be used in applications where the output is connected to a capacitive load. However, the capacitive load should be limited to 100 nF or less to prevent excessive inrush current and ensure reliable operation.
To troubleshoot issues with the TLP188(E) not turning on or off correctly, check the input voltage and current, ensure proper PCB layout and routing, and verify that the device is not damaged or overheated. Additionally, check the output load and ensure it is within the recommended specifications.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
TLP188(E(T Overview
Use the download button to access the TLP188(E(T schematic symbol and PCB footprint.
To find more CAD model downloads similar to this part, try a partial part number search, like TLP18,
or try a keyword search, such as Optocoupler
