TLP5214(D4,E footprint, schematic symbol and 3D model by Toshiba

Symbol

PCB Footprints

3D Models

TLP5214(D4,E Details

A good PCB layout for the TLP5214 involves keeping the input and output traces short and separate, using a solid ground plane, and placing the device close to the power source. Additionally, it's recommended to use a 0.1uF decoupling capacitor between the VIN and GND pins.
To ensure proper power-on and power-off, it's recommended to use a soft-start circuit to slowly ramp up the input voltage, and to add a capacitor between the VIN and GND pins to filter out noise. Additionally, the EN pin should be driven high to enable the device, and low to disable it.
The maximum allowable voltage on the output pins of the TLP5214 is 5.5V, which is the absolute maximum rating. However, it's recommended to keep the output voltage below 5V to ensure reliable operation.
To handle thermal management, it's recommended to provide a heat sink or a thermal pad on the PCB, and to ensure good airflow around the device. The device's thermal resistance (θJA) is 125°C/W, and the maximum junction temperature is 150°C.
The recommended input capacitor value for the TLP5214 is 1uF to 10uF, with a voltage rating of 6.3V or higher. The capacitor should be placed as close as possible to the VIN pin.

Community Provided

System Verified

Community Approved

Use the download button to access the TLP5214(D4,E schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like TLP52, or try a keyword search, such as Optocoupler

If you searched for TLP5214(D4,E, you might also be interested in these parts:

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →