Part Image

TLP785F - Toshiba

Description: Photocoupler GaAs IRED & Photo−Transistor, 4-pin SOP

Download TLP785F Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
TLP785F - Toshiba PCB footprint - Small Outline Packages - Small Outline Packages - 11-5L107
click to zoom
3D Models
TLP785F - Toshiba  - 3D model - Small Outline Packages - 11-5L107
click to zoom

TLP785F Details

  • Manufacturer Part Number:

    TLP785F

  • Rohs Code:

    No

  • Part Life Cycle Code:

    Active

  • Package Description:

    DIP-4

  • Reach Compliance Code:

    Unknown

  • HTS Code:

    8541.40.80.00

  • Manufacturer:

    Toshiba America Electronic Components

  • YTEOL:

    5

  • Additional Feature:

    UL RECOGNIZED

  • Coll-Emtr Bkdn Voltage-Min:

    80 V

  • Configuration:

    SINGLE

  • Current Transfer Ratio-Min:

    50%

  • Dark Current-Max:

    100 nA

  • Forward Current-Max:

    0.025 A

  • Forward Voltage-Max:

    1.3 V

  • Isolation Voltage-Max:

    5000 V

  • Mounting Feature:

    THROUGH HOLE MOUNT

  • Number of Elements:

    1

  • On-State Current-Max:

    0.05 A

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -25 °C

  • Optoelectronic Device Type:

    TRANSISTOR OUTPUT OPTOCOUPLER

  • Power Dissipation-Max:

    0.15 W

  • Response Time-Max:

    0.000002 s

  • Surface Mount:

    NO

TLP785F Frequently Asked Questions (FAQs)

  • The recommended PCB layout for the TLP785(F) involves keeping the input and output traces as short as possible, using a ground plane to reduce noise, and placing a 0.1uF bypass capacitor between the VCC and GND pins.
  • The TLP785(F) has a maximum junction temperature of 150°C. To handle thermal management, ensure good airflow around the device, use a heat sink if necessary, and avoid overheating the device during soldering or rework.
  • The maximum cable length that can be driven by the TLP785(F) depends on the specific application and the characteristics of the cable. As a general guideline, the TLP785(F) can drive cables up to 100 meters long, but this may vary depending on the specific use case.
  • Yes, the TLP785(F) can be used in a redundant or duplicated system. However, it is essential to ensure that the devices are properly isolated and that the system is designed to handle the failure of one or more devices.
  • The TLP785(F) has an ESD protection level of ±8kV for human body model (HBM) and ±2kV for charged device model (CDM).

Trust Checks

This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

TLP785F Overview

Use the download button to access the TLP785F schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like TLP78, or try a keyword search, such as Optocoupler

Parts related to TLP785F

Showing 0 results

TLP785F Alternates

Showing results

Image Part Number Model
Part Image TLP785 Toshiba America Electronic Components

Transistor Output Optocoupler, 1-Element, 5000V Isolation

Part Image TLP785F(F Toshiba America Electronic Components

Transistor Output Optocoupler, 1-Element, 5000V Isolation

Part Image TLP785(TP6,F Toshiba America Electronic Components

Transistor Output Optocoupler, 1-Element, 5000V Isolation

Part Image TLP785F Toshiba Electronic Devices & Storage Corporation

Transistor Output Optocoupler, 1-Element, 5000V Isolation

Part Image TLP781F Toshiba America Electronic Components

Transistor Output Optocoupler, 1-Element, 5000V Isolation

For a full list of alternate parts for TLP785F, check out Findchips.com