Part Image

TLV2462AQDRQ1 - Texas Instruments

Description: Automotive Low-Power Rail-to-Rail Input/Output Operational Amplifier with Shutdown

Download TLV2462AQDRQ1 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
TLV2462AQDRQ1 - Texas Instruments PCB footprint - Small Outline Packages - Small Outline Packages - D0008A
click to zoom
3D Models
TLV2462AQDRQ1 - Texas Instruments  - 3D model - Small Outline Packages - D0008A
click to zoom

TLV2462AQDRQ1 Details

  • Manufacturer Part Number:

    TLV2462AQDRQ1

  • Brand Name:

    Texas Instruments

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    SOIC

  • Pin Count:

    8

  • Country Of Origin:

    Taiwan, Thailand

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    Texas Instruments

  • YTEOL:

    15

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Average Bias Current-Max (IIB):

    0.000075 µA

  • Bias Current-Max (IIB) @25C:

    0.014 µA

  • Common-mode Reject Ratio-Min:

    71 dB

  • Common-mode Reject Ratio-Nom:

    85 dB

  • Frequency Compensation:

    YES

  • Input Offset Current-Max (IIO):

    0.007 µA

  • Input Offset Voltage-Max:

    1500 µV

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e4

  • Length:

    4.9 mm

  • Low-Bias:

    NO

  • Low-Offset:

    NO

  • Micropower:

    NO

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    2

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP8,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Packing Method:

    TR

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    NO

  • Programmable Power:

    NO

  • Qualification Status:

    Not Qualified

  • Screening Level:

    AEC-Q100

  • Seated Height-Max:

    1.75 mm

  • Slew Rate-Min:

    0.8 V/us

  • Slew Rate-Nom:

    1.6 V/us

  • Supply Current-Max:

    1.3 mA

  • Supply Voltage Limit-Max:

    6 V

  • Supply Voltage-Nom (Vsup):

    3 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    AUTOMOTIVE

  • Terminal Finish:

    Nickel/Palladium/Gold (Ni/Pd/Au)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Unity Gain BW-Nom:

    6400

  • Voltage Gain-Min:

    31622

  • Wideband:

    NO

  • Width:

    3.9 mm

TLV2462AQDRQ1 Frequently Asked Questions (FAQs)

  • A good PCB layout for the TLV2462AQDRQ1 involves keeping the analog and digital grounds separate, using a solid ground plane, and placing the op-amp close to the signal sources. Additionally, use short traces and avoid crossing digital and analog signals.
  • To choose the correct gain resistors, you need to consider the desired gain, input impedance, and output impedance. Use the gain equation provided in the datasheet and select resistors that meet the desired specifications. You can also use online calculators or simulation tools to help with the selection.
  • The maximum power dissipation for the TLV2462AQDRQ1 is 670mW. To calculate the power dissipation, use the equation: Pd = (Vcc x Icc) + (Vee x Iee), where Vcc and Vee are the supply voltages, and Icc and Iee are the supply currents.
  • Yes, the TLV2462AQDRQ1 can be used as a comparator. To do so, connect the inverting input to the reference voltage, and the non-inverting input to the signal to be compared. Use a pull-up resistor on the output to Vcc, and a pull-down resistor to ground. The output will be high when the signal is above the reference voltage and low when it's below.
  • To ensure EMC when using the TLV2462AQDRQ1, use a shielded enclosure, keep the op-amp close to the signal sources, use a common-mode choke on the power supply lines, and add decoupling capacitors on the power supply pins. Additionally, use a layout that minimizes loop areas and avoids parallel traces.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

TLV2462AQDRQ1 Overview

Use the download button to access the TLV2462AQDRQ1 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like TLV24, or try a keyword search, such as Operational Amplifiers

About Texas Instruments

Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.

Parts related to TLV2462AQDRQ1

Showing 0 results