Part Image

TLV271SN2T1G - onsemi

Description: Rail To Rail Output; Wide Bandwidth: 3 MHz; Wide Power Supply Range: 2.7 V to 16 V; Low Supply Current: 550 µA; Low Input Bias Current: 1 pA; Wide Temperature Range: -40°C to +105°C

Download TLV271SN2T1G Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
TLV271SN2T1G - onsemi PCB footprint - SOT23 (5-Pin) - SOT23 (5-Pin) - TSOP-5 CASE 483-02 ISSUE K
click to zoom
3D Models
TLV271SN2T1G - onsemi  - 3D model - SOT23 (5-Pin) - TSOP-5 CASE 483-02 ISSUE K
click to zoom

TLV271SN2T1G Details

  • Manufacturer Part Number:

    TLV271SN2T1G

  • Brand Name:

    onsemi

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    TSOP-5

  • Pin Count:

    5

  • Manufacturer Package Code:

    483

  • Country Of Origin:

    Malaysia

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Factory Lead Time:

    9 Weeks

  • Manufacturer:

    onsemi

  • YTEOL:

    5.15

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Average Bias Current-Max (IIB):

    0.00015 µA

  • Bias Current-Max (IIB) @25C:

    0.00015 µA

  • Common-mode Reject Ratio-Min:

    55 dB

  • Common-mode Reject Ratio-Nom:

    85 dB

  • Frequency Compensation:

    YES

  • Input Offset Voltage-Max:

    7000 µV

  • JESD-30 Code:

    R-PDSO-G5

  • JESD-609 Code:

    e3

  • Length:

    3 mm

  • Low-Bias:

    YES

  • Low-Offset:

    NO

  • Micropower:

    NO

  • Moisture Sensitivity Level:

    1

  • Neg Supply Voltage Limit-Max:

    -8.25 V

  • Neg Supply Voltage-Nom (Vsup):

    -5 V

  • Number of Functions:

    1

  • Number of Terminals:

    5

  • Operating Temperature-Max:

    105 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    TSSOP

  • Package Equivalence Code:

    TSOP5/6,.11,37

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Packing Method:

    TAPE AND REEL

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    NO

  • Programmable Power:

    NO

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.1 mm

  • Slew Rate-Min:

    1 V/us

  • Slew Rate-Nom:

    2.6 V/us

  • Supply Current-Max:

    1 mA

  • Supply Voltage Limit-Max:

    8.25 V

  • Supply Voltage-Nom (Vsup):

    5 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    MATTE TIN

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.95 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Unity Gain BW-Nom:

    3000

  • Voltage Gain-Min:

    6300

  • Wideband:

    NO

  • Width:

    1.5 mm

TLV271SN2T1G Frequently Asked Questions (FAQs)

  • The maximum power dissipation of the TLV271SN2T1G is 670 mW, which is calculated based on the maximum junction temperature (TJ) of 150°C and the thermal resistance (RθJA) of 125°C/W.
  • To ensure stability, it's essential to follow proper PCB layout practices, minimize parasitic capacitance, and use a compensation capacitor (if necessary) as recommended in the datasheet. Additionally, consider using a series resistor (Rs) to isolate the op-amp from the capacitive load.
  • The recommended input impedance for the TLV271SN2T1G is in the range of 1 kΩ to 100 kΩ. This ensures that the input bias current is minimized, and the op-amp operates within its specified parameters.
  • While the TLV271SN2T1G can be used as a comparator, it's not the most suitable choice. The op-amp is designed for linear applications, and its output stage is not optimized for high-speed switching. For comparator applications, consider using a dedicated comparator IC like the LM339 or LM393.
  • To ensure ESD protection, follow proper handling and storage procedures for the TLV271SN2T1G. Use an anti-static wrist strap or mat, and store the devices in anti-static packaging. Additionally, consider adding external ESD protection devices, such as TVS diodes, to your circuit design.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

TLV271SN2T1G Overview

Use the download button to access the TLV271SN2T1G schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like TLV27, or try a keyword search, such as Operational Amplifiers

Parts related to TLV271SN2T1G

Showing 0 results