SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH
Packing Method:
TR
Peak Reflow Temperature (Cel):
260
Power:
NO
Programmable Power:
NO
Screening Level:
AEC-Q100
Seated Height-Max:
1.1 mm
Slew Rate-Nom:
2 V/us
Supply Current-Max:
0.34 mA
Supply Voltage Limit-Max:
6 V
Supply Voltage-Nom (Vsup):
5 V
Surface Mount:
YES
Technology:
CMOS
Terminal Finish:
Nickel/Palladium/Gold (Ni/Pd/Au)
Terminal Form:
GULL WING
Terminal Pitch:
0.5 mm
Terminal Position:
DUAL
Unity Gain BW-Nom:
1000
Voltage Gain-Min:
158489.3
Wideband:
NO
Width:
2 mm
TLV9004QDYYRQ1 Frequently Asked Questions (FAQs)
Texas Instruments provides a recommended PCB layout in the TLV9004QDYYRQ1 datasheet, which includes guidelines for component placement, routing, and grounding. Additionally, TI recommends following good PCB design practices, such as using a solid ground plane, minimizing trace lengths, and avoiding vias under the device.
The TLV9004QDYYRQ1 requires a stable power supply with a minimum of 1.8V and a maximum of 5.5V. It is recommended to use a low-ESR capacitor (e.g., 10uF) between the VIN pin and GND, and a 100nF capacitor between the VCC pin and GND for decoupling. Additionally, ensure that the power supply is clean and free of noise.
The TLV9004QDYYRQ1 has an absolute maximum input voltage rating of 6.5V. Exceeding this voltage can cause permanent damage to the device. It is recommended to ensure that the input voltage is within the recommended operating range of 1.8V to 5.5V.
The TLV9004QDYYRQ1 has a gain setting pin (GAIN) that can be connected to VCC, GND, or left open-circuit to select one of three gain settings (1, 2, or 4). The gain setting can also be programmed using an external resistor divider network connected to the GAIN pin. Refer to the datasheet for specific gain setting configurations.
The typical output impedance of the TLV9004QDYYRQ1 is around 100 ohms. This can affect the device's ability to drive heavy loads or long cables. It is recommended to ensure that the output is properly terminated and that the load impedance is compatible with the device's output impedance.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
TLV9004QDYYRQ1 Overview
Use the download button to access the TLV9004QDYYRQ1 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like TLV90,
or try a keyword search, such as Operational Amplifiers
About Texas Instruments
Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.
