The maximum output power of TOP256EN is 256W, but it can be derated based on the input voltage, output voltage, and ambient temperature.
To ensure reliability, follow the recommended thermal design guidelines, use a suitable heat sink, and ensure good airflow around the device. Also, consider derating the output power based on the ambient temperature.
The recommended input capacitor value is 2.2uF to 4.7uF, X7R or X5R type, with a voltage rating of 400V or higher. However, the optimal value may vary depending on the specific application and input voltage.
To optimize output voltage regulation, adjust the feedback resistors (R1 and R2) to achieve the desired output voltage. Also, ensure that the output capacitor value is sufficient to filter out ripple and noise.
The bootstrap capacitor (Cb) is used to generate the high-side gate drive voltage for the power MOSFET. It should be a low-ESR ceramic capacitor with a value of 1nF to 10nF, and a voltage rating of 25V or higher.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
TOP256EN Overview
Use the download button to access the TOP256EN schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like TOP25,
or try a keyword search, such as Power Management Circuits
