A 2-layer or 4-layer PCB with a solid ground plane and thermal vias is recommended. The device should be placed near a thermal pad or a heat sink to dissipate heat efficiently.
Monitor the device's junction temperature (TJ) and ensure it stays within the recommended range of -40°C to 125°C. Also, ensure the input voltage (VIN) is within the recommended range of 2.7V to 5.5V.
A 1uF to 10uF ceramic capacitor (X5R or X7R dielectric) is recommended for input decoupling. The capacitor should be placed as close to the device as possible.
Use a shielded enclosure, keep the device away from antennas and other EMI sources, and use a common-mode choke or ferrite bead on the input lines to reduce EMI.
The device has built-in overcurrent protection (OCP) and short-circuit protection (SCP). During an overcurrent or short-circuit condition, the device will limit the output current to prevent damage.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
TPH7R204PL,LQ Overview
Use the download button to access the TPH7R204PL,LQ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like TPH7R,
or try a keyword search, such as Small Signal Field-Effect Transistors
