Please enter a minimum 3 letters or numbers
Technical Content
Part Image

TPS79318DBVRG4 - Texas Instruments

Description: LDO Voltage Regulators High PSRR Fast RF High-Enable 200mA

Download TPS79318DBVRG4 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
TPS79318DBVRG4 - Texas Instruments - PCB symbol
click to zoom
PCB Footprints
TPS79318DBVRG4 - Texas Instruments PCB footprint - SOT23 (5-Pin) - SOT23 (5-Pin) - DBV0005A
click to zoom
3D Models
TPS79318DBVRG4 - Texas Instruments - 3D model - SOT23 (5-Pin) - DBV0005A
click to zoom

TPS79318DBVRG4 Details

  • Manufacturer Part Number:

    TPS79318DBVRG4

  • Brand Name:

    Texas Instruments

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    SOT-23

  • Pin Count:

    5

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.90

  • Manufacturer:

    Texas Instruments

  • YTEOL:

    4

  • Adjustability:

    FIXED

  • Dropout Voltage1-Nom:

    0.112 V

  • Input Voltage Absolute-Max:

    6 V

  • Input Voltage-Max:

    5.5 V

  • Input Voltage-Min:

    2.7 V

  • JESD-30 Code:

    R-PDSO-G5

  • JESD-609 Code:

    e4

  • Length:

    2.9 mm

  • Line Regulation-Max:

    0.006048%

  • Load Regulation-Max:

    0.005%

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Outputs:

    1

  • Number of Terminals:

    5

  • Operating Temperature TJ-Max:

    125 °C

  • Operating Temperature TJ-Min:

    -40 °C

  • Output Current1-Max:

    0.2 A

  • Output Voltage1-Max:

    1.836 V

  • Output Voltage1-Min:

    1.764 V

  • Output Voltage1-Nom:

    1.8 V

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    LSSOP

  • Package Equivalence Code:

    TSOP5/6,.11,37

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, LOW PROFILE, SHRINK PITCH

  • Packing Method:

    TR, 7 INCH

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Regulator Type:

    FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR

  • Seated Height-Max:

    1.45 mm

  • Surface Mount:

    YES

  • Terminal Finish:

    Nickel/Palladium/Gold (Ni/Pd/Au)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.95 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Voltage Tolerance-Max:

    2%

  • Width:

    1.6 mm

TPS79318DBVRG4 Frequently Asked Questions (FAQs)

  • The maximum input voltage that can be applied to the TPS79318DBVRG4 is 5.5V, as specified in the absolute maximum ratings section of the datasheet. Exceeding this voltage can damage the device.
  • To ensure the output voltage is stable and accurate, make sure to follow the recommended layout and component selection guidelines in the datasheet, including the use of a 1μF ceramic capacitor at the output and a 10nF ceramic capacitor at the input. Additionally, ensure that the input voltage is within the recommended operating range and that the device is operated within the specified temperature range.
  • The minimum input capacitance required for stable operation is 1μF, as specified in the datasheet. However, it is recommended to use a higher value capacitor, such as 4.7μF or 10μF, to ensure stable operation over a wide range of input voltages and temperatures.
  • The TPS79318DBVRG4 is rated for operation up to 125°C, but the device's performance and reliability may degrade at high temperatures. It is recommended to derate the output current and ensure proper thermal management to prevent overheating and ensure reliable operation.
  • The output voltage of the TPS79318DBVRG4 is determined by the resistor divider network connected to the FB pin. The output voltage can be calculated using the formula: Vout = 0.8V x (1 + R1/R2), where R1 and R2 are the resistors in the divider network.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

TPS79318DBVRG4 Overview

Use the download button to access the TPS79318DBVRG4 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like TPS79, or try a keyword search, such as Linear Regulator ICs

About Texas Instruments

Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.

Parts related to TPS79318DBVRG4

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

TPS79318DBVRG4 Alternates

Showing results

Image Part Number Model
Part Image TPS79318DBVR Texas Instruments

Fixed Positive LDO Regulator, 1.8V, PDSO5
Part Image TPS79318DBVT Texas Instruments

Fixed Positive LDO Regulator, 1.8V, PDSO5
Part Image TPS79318DBVTG4 Texas Instruments

Fixed Positive LDO Regulator, 1.8V, 0.112V Dropout, BICMOS, PDSO5