The maximum input voltage that can be applied to the TPS79333DBVRG4 is 13.2V, as specified in the datasheet. However, it's recommended to operate the device within the recommended input voltage range of 2.7V to 12V for optimal performance and reliability.
To ensure the stability of the output voltage, it's essential to follow the recommended layout and component selection guidelines provided in the datasheet. This includes using a suitable output capacitor, such as a 10uF ceramic capacitor, and placing it close to the output pin. Additionally, ensure that the input capacitor is properly sized and placed to minimize input voltage ripple.
The TPS79333DBVRG4 can deliver up to 150mA of output current. However, the actual output current capability may be limited by the input voltage, output voltage, and thermal considerations. It's essential to consult the datasheet and perform thermal calculations to ensure the device can deliver the required output current in your specific application.
The enable pin (EN) is an active-high input that allows the device to be enabled or disabled. To enable the device, connect the EN pin to a logic high signal (typically VCC). To disable the device, connect the EN pin to a logic low signal (typically GND). It's essential to ensure that the EN pin is properly driven to avoid unwanted device behavior.
The power-good (PG) pin is an open-drain output that indicates the status of the output voltage. When the output voltage is within the specified tolerance, the PG pin is pulled low. When the output voltage is out of tolerance, the PG pin is in a high-impedance state. This pin can be used to monitor the output voltage and implement fault detection or shutdown mechanisms in your system.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
TPS79333DBVRG4 Overview
Use the download button to access the TPS79333DBVRG4 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like TPS79,
or try a keyword search, such as Linear Regulator ICs
About Texas Instruments
Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.
