The recommended PCB layout for the TPSMB91CA involves placing the device close to the power source, using a ground plane, and keeping the leads as short as possible to minimize inductance and resistance. A 4-layer PCB with a dedicated ground plane is recommended.
To select the correct TVS diode, consider the following factors: voltage rating, peak pulse current, clamping voltage, and response time. Ensure the TVS diode can handle the maximum voltage and current of your application, and choose a device with a clamping voltage that is below the maximum voltage rating of your circuit.
A TVS diode is designed to protect against high-energy transients, such as lightning strikes or electrical surges, by clamping the voltage to a safe level. A Zener diode, on the other hand, is used for voltage regulation and is not designed to handle high-energy transients. TVS diodes have a much higher power rating and faster response time than Zener diodes.
Yes, you can use multiple TPSMB91CA devices in parallel to increase the current rating, but ensure that the devices are properly matched and that the PCB layout is designed to handle the increased current. However, it's recommended to consult with the manufacturer or a qualified engineer to ensure that the parallel configuration is properly implemented.
To ensure proper soldering, follow the recommended soldering profile and use a solder with a high melting point. Apply a small amount of solder to the PCB pads and use a soldering iron with a fine tip to solder the device. Avoid overheating the device or applying excessive force, which can damage the internal components.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
TPSMB91CA Overview
Use the download button to access the TPSMB91CA schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like TPSMB,
or try a keyword search, such as Transient Suppressors
