1 X 0.60 MM, 0.40 MM HEIGHT, ROHS COMPLIANT, ULTRA SMALL, SLP1006P2T, 2 PIN
Pin Count:
2
Country Of Origin:
Mainland China
ECCN Code:
EAR99
HTS Code:
8541.10.00.50
Manufacturer:
Semtech Corporation
YTEOL:
6.28
Breakdown Voltage-Nom:
27 V
Clamping Voltage-Max:
50 V
Configuration:
SINGLE
Diode Element Material:
SILICON
Diode Type:
TRANS VOLTAGE SUPPRESSOR DIODE
JESD-30 Code:
R-CBCC-N2
JESD-609 Code:
e4
Moisture Sensitivity Level:
1
Non-rep Peak Rev Power Dis-Max:
150 W
Number of Elements:
1
Number of Terminals:
2
Operating Temperature-Max:
125 °C
Operating Temperature-Min:
-55 °C
Package Body Material:
CERAMIC, METAL-SEALED COFIRED
Package Shape:
RECTANGULAR
Package Style:
CHIP CARRIER
Peak Reflow Temperature (Cel):
260
Polarity:
UNIDIRECTIONAL
Qualification Status:
Not Qualified
Rep Pk Reverse Voltage-Max:
24 V
Surface Mount:
YES
Technology:
AVALANCHE
Terminal Finish:
NICKEL PALLADIUM GOLD
Terminal Form:
NO LEAD
Terminal Position:
BOTTOM
UCLAMP2401T.TCT Frequently Asked Questions (FAQs)
A good PCB layout for the UCLAMP2401T.TCT involves keeping the input and output traces short and away from each other, using a solid ground plane, and placing the device close to the protected circuit. Additionally, it's recommended to use a low-ESR capacitor between the VCC and GND pins.
The recommended capacitor value for the UCLAMP2401T.TCT is between 1nF to 10nF. A higher capacitance value can provide better noise filtering, but may also increase the device's response time. A good starting point is a 2.2nF capacitor, and then adjust based on the specific application requirements.
The UCLAMP2401T.TCT can handle surge currents up to 30A, but this value may vary depending on the specific application and PCB layout. It's recommended to consult the datasheet and application notes for more information.
Yes, the UCLAMP2401T.TCT is suitable for protecting high-speed data lines, such as USB, HDMI, and Ethernet. However, it's essential to ensure that the device is properly matched to the signal frequency and impedance to avoid signal degradation.
To ensure proper soldering, use a soldering iron with a temperature of 250°C to 260°C, and apply a small amount of solder paste to the pads. Use a soldering technique that minimizes the risk of overheating the device, and avoid applying excessive force or pressure during the soldering process.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
UCLAMP2401T.TCT Overview
Use the download button to access the UCLAMP2401T.TCT 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like UCLAM,
or try a keyword search, such as Transient Suppressors
