A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the input and output traces short and away from each other to minimize noise coupling.
The UCLAMP3061P.TNT requires a bias voltage of 3.3V or 5V. Ensure the bias voltage is stable and within the recommended range. A decoupling capacitor of 10uF or larger is recommended to filter out noise.
The UCLAMP3061P.TNT is rated for operation from -40°C to 125°C. However, it's recommended to operate within -20°C to 85°C for optimal performance and reliability.
The UCLAMP3061P.TNT has built-in ESD protection, but it's still recommended to follow proper ESD handling procedures during assembly and testing. Use an ESD wrist strap or mat, and ensure the PCB is properly grounded.
The recommended input signal amplitude is 100mV to 1V peak-to-peak. Signals outside this range may not be properly clamped or may cause distortion.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
UCLAMP3061P.TNT Overview
Use the download button to access the UCLAMP3061P.TNT 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like UCLAM,
or try a keyword search, such as Transient Suppressors
