The recommended soldering temperature is 260°C (500°F) for 3 seconds or less, and 240°C (464°F) for 5 seconds or less. It's essential to follow the recommended soldering profile to prevent damage to the capacitor.
Yes, the UCM1K101MNL1GS is designed to withstand vibrations up to 10Hz to 200Hz, 1.5mm double amplitude, and 3 directions (X, Y, Z) according to IEC 60068-2-6. However, it's recommended to consult with the manufacturer or a qualified engineer to ensure the capacitor meets the specific vibration requirements of your application.
The UCM1K101MNL1GS has a moisture resistance rating of 85°C, 85% RH, 1000 hours according to IEC 60068-2-78. While it can operate in humid environments, it's essential to ensure the capacitor is properly sealed and protected from moisture ingress to prevent degradation or failure.
The ESR of the UCM1K101MNL1GS is not explicitly stated in the datasheet. However, Nichicon provides an ESR vs. frequency chart in the datasheet, which shows the ESR at 100 kHz is approximately 0.15 ohms. For more accurate ESR values, it's recommended to consult with the manufacturer or a qualified engineer.
No, the UCM1K101MNL1GS is rated for operation up to 125°C. Exceeding this temperature rating can cause the capacitor to degrade or fail. If your application requires operation above 125°C, you should consider a different capacitor with a higher temperature rating.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
UCM1K101MNL1GS Overview
Use the download button to access the UCM1K101MNL1GS schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like UCM1K,
or try a keyword search, such as Aluminum Electrolytic Capacitors
