ROHM recommends a thermal pad on the bottom of the package, connected to a large copper area on the PCB to dissipate heat efficiently. A minimum of 2oz copper thickness is recommended, and the thermal pad should be connected to a ground plane or a dedicated heat sink.
To ensure reliable operation in high-temperature environments, it's essential to follow the recommended derating curves for the device. Additionally, consider using a heat sink or thermal interface material to reduce the junction temperature. ROHM also recommends using a thermally conductive PCB material and ensuring good airflow around the device.
Although the datasheet specifies the recommended operating voltage range, it's essential to note that the maximum allowed voltage on the input pins is typically 6V, regardless of the operating voltage. Exceeding this voltage may damage the device.
ROHM recommends using ESD protection devices, such as TVS diodes or ESD arrays, on the input lines to protect the UCR10EVHFSR062 from electrostatic discharge. Additionally, follow proper handling and storage procedures to prevent ESD damage.
ROHM recommends a soldering profile with a peak temperature of 260°C (500°F) and a dwell time of 10-30 seconds. It's essential to follow the recommended soldering profile to prevent damage to the device.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
UCR10EVHFSR062 Overview
Use the download button to access the UCR10EVHFSR062 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like UCR10,
or try a keyword search, such as Fixed Resistors
